[mahoni_archive]

Hallo erst mal . .
Ich brenne seit langer zeit DVD9 (Verbatim) mit Nero.(Plextor Px-716AL)

Seit 3 Tagen kommen Probleme auf.

Ich habe bis Dato keine Probleme gehabt (Verbatim) DVD+R DL mit Nero zu brennen

aber nun bekomme ich immer folgende Fehlermeldung:

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

Hier mal die Log datei von Nero:

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0

Recorder: <PLEXTOR DVDR PX-716AL> Version: 1.02 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default
CD-ROM: <PLEXTOR DVDR PX-716AL >Version: 1.02 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP2514N atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3120023A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716AL atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PLEXTOR DVD-ROM PX-130A atapi Port 1 ID 1 DMA: On
OtherPeripheral : SI Pseudo Device 0000 Si3124r5 Port 3 ID 31 DMA: Off

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-716AL G: CdRom0
PLEXTOR DVD-ROM PX-130A H: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1535MB (1572336kB)
Free physical memory: 761MB (779796kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.3.2010
UDF/ISO Zusammenstellung
05:15:16 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

05:15:17 #2 Phase 112 File dlgbrnst.cpp, Line 1764
DVD-Video files reallocation started

05:15:17 #3 Phase 114 File dlgbrnst.cpp, Line 1764
DVD-Video files reallocation completed (no file modified)

05:15:17 #4 Text 0 File Isodoc.cpp, Line 6671
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

05:15:17 #5 Phase 111 File dlgbrnst.cpp, Line 1764
DVD-Video files sorted

05:15:17 #6 ISO9660GEN -11 File Geniso.cpp, Line 3347
First writeable address = 0 (0x00000000)

05:15:17 #7 ISO9660GEN -11 File Geniso.cpp, Line 3347
First writeable address = 0 (0x00000000)

05:15:17 #8 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media

05:15:17 #9 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

05:15:17 #10 ISO9660GEN -11 File Geniso.cpp, Line 3347
First writeable address = 0 (0x00000000)

05:15:18 #11 ISO9660GEN -11 File Geniso.cpp, Line 3347
First writeable address = 0 (0x00000000)

05:15:18 #12 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3944367 (876:31.42, 7703MB)

05:15:18 #13 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

05:15:18 #14 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: PLEXTOR DVDR PX-716AL, Media type: DVD+R DL
Disc Manufacturer ID: <MKM>, Media Type ID: <003>, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

05:15:18 #15 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

05:15:18 #16 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3944368 (3944368) = #3944368/876:31.43
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3944368 blocks [G: PLEXTOR DVDR PX-716AL]
--------------------------------------------------------------

05:15:18 #17 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [G: PLEXTOR DVDR PX-716AL] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8078065664, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3944368 | 0 | 0x00
3944368 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

05:15:18 #18 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

05:15:18 #19 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

05:15:18 #20 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started

05:15:18 #21 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.

05:15:18 #22 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed

05:15:18 #23 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 4x (5.540 KB/s)

05:15:18 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

05:15:18 #25 SPTI -1066 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x074fcd00: Len x804

05:15:18 #26 Text 0 File DVDPlusDualLayer.cpp, Line 660
L0 Data Zone Capacity set to 1972320 (1E1860h, 3852MB) -> OK, confirmed setting

05:15:18 #27 CDR -1205 File DVDPlusDualLayer.cpp, Line 687
Burning Layer 1

05:15:18 #28 Text 0 File DVDPlusDualLayer.cpp, Line 697
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

05:15:18 #29 Text 0 File Cdrdrv.cpp, Line 10026
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 258
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MKM.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..259]:
00 00 03 4D 4B 4D 00 00 - 00 00 00 30 30 33 00 40 ...MKM.....003.@
25 25 37 0C 02 2D 66 02 - 2D 66 21 23 0D 0E 14 14 %%7..-f.-f!#....
02 01 01 10 00 21 23 0D - 0E 14 14 02 01 01 10 00 .....!#.........
04 00 33 7B 5C 02 2B 64 - 2E 28 1C 0A 0A 20 02 01 ..3{\.+d.(......
01 00 02 69 63 2E 2A 1C - 0C 0C 20 03 02 01 00 72 ...ic.*........r
84 00 02 53 67 2E 28 1C - 0A 0A 20 02 01 01 00 00 ...Sg.(.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 ................

05:15:18 #30 Text 0 File DVDR.cpp, Line 6808
Drive: PLEXTOR DVDR PX-716AL
Book Type request [PX]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

05:15:18 #31 CDR -1207 File DVDR.cpp, Line 6452
Book Type automatically set to: DVD-ROM

05:15:18 #32 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

05:15:18 #33 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

05:15:19 #34 Text 0 File Cdrdrv.cpp, Line 1367
05:15:19.875 - 㩇倠䕌员剏䐠䑖⁒†塐㜭㘱䱁 : Queue again later

05:15:50 #35 SPTI -1119 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1119)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 09 03
Buffer x09420080: Len x10000
0x01 00 02 00 F5 00 00 00 A7 3A F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 08 4E 65 75 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

05:15:50 #36 CDR -1119 File Writer.cpp, Line 306
Track following error
G: PLEXTOR DVDR PX-716AL

05:15:50 #37 SPTI -1176 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04

05:15:50 #38 Phase 127 File dlgbrnst.cpp, Line 1764
Generating DVD high compatibility borders

05:15:51 #39 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 32

05:15:51 #40 Text 0 File DVDR.cpp, Line 6808
Drive: PLEXTOR DVDR PX-716AL
Book Type request [PX]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

05:15:51 #41 CDR -1176 File WriterStatus.cpp, Line 162
Session fixation error
G: PLEXTOR DVDR PX-716AL

05:15:51 #42 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

05:15:51 #43 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 4x (5.540 KB/s)

05:15:51 #44 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

05:15:55 #45 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed

05:15:55 #46 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Dvd`s und CD`s kann ich normal brennen, da gibt es keine Probleme !!??
Woran kann das liegen !!??Vielen Dank im vor raus...

[Akaboy_archive]

Das Problem haben viele. Aber ne wirkliche Problemlösung sehr schwer.

Es kann direkt an den Rohlingen liegen. Das er die plötzlich nicht mehr mag. Vielelicht mal runtergehen mit der Brenngeschwindigkeit. Anderer Rohlinghersteller.

Die meisten hab sich nen neuen Brenner gekauft oder einfach nur das Anschlusskabel gewechselt.

Ist ein problem wo es nicht wirklich eine Lösung gibt.